Of all the jailbreak tools ever released, checkra1n is the one that changed the rules. It was not the newest jailbreak, and it was not the easiest to use. But it was built on something no other tool had: an exploit in the iPhone’s bootrom that Apple cannot patch. That single fact made checkra1n the most reliable jailbreak ever made for the phones it supports — and it is also the reason it will never work on a newer iPhone. This guide explains checkra1n in plain English: what it is, which iPhones it works on, what its limits are, and where it still matters in 2026.
If you are trying to decide which tool to use for an older iPhone, start by confirming what is possible for your exact phone. Our Jailbreak Compatibility Checker will tell you in seconds, and our iPhone Jailbreak Compatibility Chart shows the full picture for every model.
What Is checkra1n?
checkra1n is a semi-tethered jailbreak, first released in November 2019, for iPhone 5s through iPhone X running iOS 12 through iOS 14. It installs Cydia as its package manager — the classic app store for tweaks and themes — and it runs from a computer, with your iPhone connected by a USB cable. It is free, and it was built by a team of well-known jailbreak developers.
The word “semi-tethered” describes what happens when the phone restarts. If you reboot a checkra1n jailbroken iPhone, it starts up in its normal, un-jailbroken state. You need your computer and checkra1n again to re-activate the jailbreak. Your tweaks do not disappear — they are still on the phone — but they will not run until you re-jailbreak. For most people that is a minor inconvenience: re-running the tool takes a few minutes.
checkra1n was a turning point because it was the first jailbreak for newer iOS versions in years that did not depend on Apple leaving a hole unpatched. Most jailbreaks live and die by software bugs. checkra1n did not. That is why it is worth understanding properly, even if you end up using a different tool.
The checkm8 Bootrom Exploit, Explained Simply
To understand checkra1n, you need to understand checkm8, the exploit underneath it. When an iPhone powers on, the first code it runs is called the bootrom. The bootrom checks the next piece of software, which checks the next one, and so on until iOS itself loads. It is a chain of trust: each step verifies the next before handing over control.
The bootrom has one unusual property: it is burned into read-only memory on the chip. Apple cannot change it with a software update, because read-only memory cannot be rewritten. In 2019, a security researcher known as axi0mX discovered a flaw in the bootrom on the A5 through A11 chips. The flaw was in the way the bootrom handles a USB request during startup, and it allowed an attacker — or a jailbreak tool — to take over the boot process before iOS security had loaded. He called it checkm8.
Because the flaw is in hardware, Apple had no software fix. The only way to remove it was to build a new chip. That is what Apple did with the A12 in 2018, which is why checkm8 stops at the iPhone X. Every iPhone from the XS onward uses a chip where the flaw has been fixed, and no bootrom exploit of this kind has been found for them since.
It is worth being precise about one detail: checkm8 affects the A5 through A11 chips, but checkra1n — the tool — supports the A7 through A11 chips, which means iPhone 5s through iPhone X. The A5 and A6 chips in the iPhone 4s, 5 and 5c have the same hardware flaw, but checkra1n was never built for them. If you own an iPhone older than the 5s, checkra1n is not your tool, even though the underlying exploit covers your chip.
Which Devices and iOS Versions Does checkra1n Support?
checkra1n officially supports the iPhone 5s through iPhone X, on iOS 12.0 through iOS 14.8.1. That covers a long list of models: the 5s, 6, 6 Plus, 6s, 6s Plus, SE (1st generation), 7, 7 Plus, 8, 8 Plus, and X. It also supports some iPads with the same chips, including several iPad Air, iPad mini, and iPad Pro models.
The versions matter as much as the models. checkra1n’s official support stops at iOS 14.8.1. That is a hard line, not a suggestion. If your iPhone X is running iOS 15 or iOS 16, checkra1n will not work, and no settings change will make it work. For those versions you need palera1n, the newer checkm8 tool built for iOS 15 and 16 — see our step-by-step palera1n guide for iPhone 8 and iPhone X.
You also need a computer, and for a long time it had to be a Mac or a Linux machine — checkra1n never had an official Windows version, although the community built a bootable USB option for Windows users similar to palera1n’s. The tool itself is a small download, but it requires a reliable USB cable and a few minutes of your time, including putting the phone into DFU mode.
Why checkra1n Cannot Work on iPhone XS or Newer — Ever
This is the question that never goes away, so it deserves a direct answer: checkra1n will never work on the iPhone XS, iPhone 11, iPhone 12, or anything newer. It is not a matter of time, and it is not a matter of waiting for an update. checkra1n depends on checkm8, and checkm8 does not exist on those chips.
The iPhone XS and XR introduced the A12 chip, which fixed the bootrom flaw. The A13, A14, A15, A16, A17, A18, and A19 chips that followed do not have it either. There is no way to add a hardware flaw back into a chip that does not have one, and there is no software update to checkra1n that can create it. Any site claiming a new version of checkra1n that works on the iPhone 15 or 16, or a checkra1n for iOS 26, is lying. The tool’s own developers have said so, and the hardware is the proof.
The same logic applies to iOS versions beyond 14. checkra1n was written for the way iOS 12 to 14 works, and later iOS versions changed too much of the system for the tool to run — which is why palera1n was created as its successor for iOS 15 and 16 on the same devices.
checkra1n vs. palera1n vs. unc0ver
If you own an older iPhone, you do not need to learn three tools — you need to know which one matches your phone and your iOS version. The table below is the shortcut.
| Tool | Devices | iOS versions | Semi-tethered? | Package manager |
|---|---|---|---|---|
| checkra1n | iPhone 5s–X (A7–A11) | iOS 12–14.x | Yes — re-run from a computer after reboot | Cydia |
| palera1n | iPhone 6s–X (A8–A11) | iOS 15–16 | Yes — re-run from a computer after reboot | Sileo |
| unc0ver | iPhone 6s–12 (A9–A14) | Up to iOS 14.8.1 | No — semi-untethered, re-run the app on the phone | Cydia |
The decision is usually made for you. If your phone is on iOS 14 or earlier, checkra1n is the most reliable option for A11 and older devices, because the bootrom exploit cannot be patched and the tool has years of testing behind it. If your phone is on iOS 15 or 16, use palera1n — checkra1n simply does not support those versions. If you have an A12 to A14 device on iOS 14, unc0ver is worth knowing about, because it is semi-untethered and does not need a computer after a reboot. If your phone is an iPhone XS or newer on iOS 15 or later, move to Dopamine where it applies, or accept that no jailbreak exists — the chart will tell you which.
The A11 iOS 14 Passcode and SEP Limitation
checkra1n has one well-known limitation that every iPhone 8 and iPhone X owner should know about. On A11 devices running iOS 14, the Secure Enclave Processor (SEP) is tied to the iOS version in a way that constrains the jailbreak. In practical terms, the SEP becomes unusable in the jailbroken state if a passcode was set after the iPhone was restored.
Concretely, this means the passcode must not be set on iOS 14 through 14.8.1 on the iPhone 8 and iPhone X if you want the SEP to keep working, and some versions of checkra1n would not even start a jailbreak on an A11 device with a passcode set. The jailbreak will then offer a warning: either accept the limitation, or remove your passcode entirely before jailbreaking. And while you are jailbroken under this limitation, your device cannot use a passcode, Touch ID, or Face ID — you unlock with a swipe, and Apple Pay is unavailable — until you reboot the phone back into its normal, un-jailbroken state.
That sounds dramatic, and it is certainly inconvenient, but it is also completely honest: it is the SEP doing its job. The SEP guards your most sensitive data, and when its normal environment is disturbed, it refuses to cooperate rather than risking that data. checkra1n’s developers chose to be transparent about it rather than ship a tool that silently broke security features. The same SEP reasoning drives palera1n’s passcode restriction on iOS 16, which our palera1n guide explains in detail. If the passcode rule makes checkra1n unworkable for you, that is a valid reason to choose a different tool or a different iOS version.
Where checkra1n Still Matters in 2026
checkra1n is no longer the newest tool, and it no longer supports the newest iOS version on its devices. It still matters, and probably will for a long time, for three reasons.
Older devices that will never get a newer jailbreak
Millions of iPhone 5s through iPhone X devices are still in use around the world, often as second phones, music players, or hand-me-downs for children. Many of them run iOS 12 to 14, where checkra1n is the best and sometimes the only jailbreak. For those phones, checkra1n is not a legacy curiosity — it is the working tool. It keeps old hardware useful, lets people customize devices that Apple no longer supports, and gives a second life to phones that would otherwise be discarded.
Security research and forensics
Because checkm8 is unpatchable, researchers use checkra1n as a stable platform for studying iOS itself. It lets them inspect the boot process, test security assumptions, and understand how Apple’s protections actually work. Law enforcement and forensic analysts use the same capability to access devices in criminal investigations, under lawful authority — one of the reasons the tool is sometimes mentioned in news stories. That dual use is a reminder that jailbreak tools are powerful capabilities, not just tweaks: they should be used responsibly, on your own devices, and within the law.
A benchmark for every jailbreak since
Since 2019, every new jailbreak has been measured against checkra1n: is it as reliable, is it as well documented, does it respect the SEP? checkra1n set a standard for transparency. Its developers documented the exploit, published the code, and warned users about the limitations instead of hiding them. That honesty is why this site recommends it for the phones it supports, and why we name it whenever the question of older devices comes up.
When palera1n Is the Better Tool Today
For most people jailbreaking an iPhone 8 or X in 2026, palera1n is the better choice, and this site says so clearly. It supports iOS 15 and 16, the versions those phones actually run; it installs Sileo, which is actively maintained; it offers the rootless mode that avoids the passcode problem; and it is the tool the community is still developing. checkra1n remains the better choice only when the phone is on iOS 14 or earlier, or when you specifically need a tweak that only works with Cydia and a rootful setup on iOS 12 to 14. If you are not sure which of the two you need, check the Jailbreak Compatibility Checker — it is faster than guessing, and guessing is how people download the wrong tool.
Safety: Only Download checkra1n from checkra.in
One last warning, and it is an important one. checkra1n’s official site is checkra.in. That is the only place the real tool is distributed. There are many clone sites with similar names, similar logos, and similar download buttons, and most of them are scams. They bundle the download with surveys, paid “unlocks,” configuration profiles, or worse — malware that steals your data.
The rules for staying safe are the same rules as for any jailbreak tool: only download from the official site or the official GitHub repository; never pay for the tool; never complete a survey or install an app to “unlock” a download; and never trust a site that claims checkra1n works on an iPhone XS or newer, or on iOS 15, 16, or 26. If a site says that, it is not an updated checkra1n — it is a fake using checkra1n’s name. If you want a broader view of how these scams work, read our guide on spotting fake iOS 26 jailbreaks and our blog for other safety checks.
Frequently Asked Questions
Is checkra1n still working in 2026?
Yes, on the devices and iOS versions it supports — iPhone 5s through iPhone X on iOS 12 through 14.8.1. It has not been updated for iOS 15 or later, because the tool was designed for the iOS 12–14 era and palera1n took over for iOS 15 and 16. For the supported combinations, checkra1n still works as reliably as it ever did.
Can checkra1n jailbreak the iPhone XS?
No, never. The iPhone XS uses the A12 chip, and checkm8 was fixed in the A12. checkra1n cannot work on any iPhone from the XS onward, on any iOS version. If you own an XS or newer, check our compatibility chart to see which tool — if any — applies to your phone.
Is checkra1n free?
Yes. checkra1n has always been free, and it is only available from checkra.in. Any site charging for it is a scam.
Can checkra1n unlock iCloud or a carrier?
No. A jailbreak does not remove iCloud Activation Lock or a carrier lock, and checkra1n cannot bypass them. If a site says it can, that site is lying about both things. Learn more about what this site will and will not promise on our About page.
Will checkra1n get an update for iOS 26?
No. No update to checkra1n can add support for chips that do not have the checkm8 flaw, and no public jailbreak exists for iOS 26 on any device as of November 2026. checkra1n will remain what it is: the best jailbreak ever made for the iPhone 5s through iPhone X on iOS 12 to 14.
