iPhone X connected to a laptop running the palera1n jailbreak

How to Jailbreak iPhone 8 and iPhone X with palera1n: Step-by-Step Guide

The iPhone 8 and iPhone X are in a special position in 2026. They are too old for iOS 26, they stopped at iOS 16, and they are also the newest iPhones that can still be jailbroken with a modern tool. That tool is palera1n, and this guide explains exactly how it works, what you need before you start, and how to use it safely — including the passcode rule that catches more people than any other part of the process.

Read the warnings before the steps. Most failed palera1n attempts are not caused by the tool. They are caused by a passcode that should not have been set, a missing backup, or a download from the wrong website. If you get those three things right, the rest of the process is straightforward. Before you start, it is worth confirming your phone is actually supported: check your model and iOS version with our Jailbreak Compatibility Checker, and compare it against our iPhone Jailbreak Compatibility Chart so you know where your phone sits.

What Is palera1n?

palera1n is a jailbreak for iPhones and iPads with the A8 through A11 chips, which covers the iPhone 6s through iPhone X, running iOS 15.0 through iOS 16. It is built on the checkm8 bootrom exploit, the same unpatchable hardware flaw that powers checkra1n. Because checkm8 lives in the bootrom, Apple cannot fix it with a software update, which is why palera1n still works on these phones years after it was released.

palera1n is semi-tethered. That means the jailbreak stays active while your phone is on, but if you restart the phone, you lose the jailbroken state until you connect the phone to your computer and run palera1n again. Your tweaks and apps do not disappear when you restart — they are still on the phone — but they will not work until you re-jailbreak. In practice, most people re-run palera1n in a minute or two and carry on.

palera1n installs a package manager called Sileo, which is where you find and install tweaks, themes, and utilities. It is the modern replacement for Cydia, and it works the same way: you add sources, browse packages, and install them. Unlike some older tools, palera1n is an open-source, community project. It is free, its code is public, and it is maintained by known developers in the jailbreak community.

Rootless or rootful? Choose rootless

palera1n offers two modes, and the choice matters. In rootful mode, tweaks are installed into the system files, the way jailbreaks traditionally worked. It uses a fake filesystem — fakeFS — to create writable space, and it is the more invasive option. In rootless mode, tweaks are installed into a separate location on the phone, and the system files are left alone. Rootless is the default in current palera1n versions, and it is the mode almost everyone should choose.

Mode How it works Who should use it
Rootless (recommended) Tweaks live in a separate, safe location; system files untouched Almost everyone — simpler, safer, avoids the passcode problem
Rootful (fakeFS) Creates a fake filesystem so tweaks can modify system files Only advanced users who need an old rootful-only tweak

Unless you have a specific reason to need a rootful-only tweak, choose rootless. It is what this guide assumes from here on.

Before You Start: Requirements and Honest Warnings

Do not skip this section. Every warning here is a problem that real users have hit, and all of them are avoidable.

Back up your iPhone first

Before you jailbreak anything, make a full backup of your iPhone — with your computer, not just iCloud. A jailbreak modifies system files, and while palera1n is reliable, something can always go wrong: a cable can disconnect, a tweak can misbehave, or a mistake can leave the phone in a boot loop. A backup is the difference between a bad afternoon and losing your photos, messages, and settings. If you do not have a computer you can back up to, wait until you do. Jailbreaking without a backup is not a calculated risk; it is an unnecessary one.

The passcode rule — read this twice

This is the most important part of the whole guide. On iPhone 8 and iPhone X — the A11 devices — iOS 16 has a strict rule tied to the Secure Enclave Processor (SEP). For the fakeFS / rootful path on iOS 16, your iPhone must never have had a passcode set after it was restored. If a passcode was set at any point after the last restore, the fakeFS cannot be created, and the rootful jailbreak will fail.

What does that mean in practice? If you restored your iPhone 8 or X and then set a passcode during setup, you cannot use the rootful path unless you restore the phone again and do not set a passcode this time. Restoring means wiping the phone and starting over, which is why you need that backup first. You should also be aware that on A11 devices, Face ID is disabled in the jailbroken state on iOS 15 and iOS 16 — it will work again after a reboot into the normal, un-jailbroken state, but while jailbroken, you unlock with your passcode instead.

The good news is that rootless mode avoids this problem entirely. If you use rootless, you do not need a fakeFS, and the passcode restriction does not apply. That is the main reason we recommend rootless for every iPhone 8 and iPhone X owner. If you are following this guide, choose rootless in the palera1n options and you can forget the passcode rule exists.

You need a computer — Mac or Linux, or a USB stick on Windows

palera1n is not an app you install from your phone. It is a command-line tool that runs on a computer, with your iPhone connected by a USB cable. That is non-negotiable, and it is also a good way to spot fake palera1n sites: any site that claims you can jailbreak from your browser, or without a computer, is lying.

  • Mac or Linux: palera1n runs natively. Download the official release, open a terminal, and follow the commands the project documents.
  • Windows: there is no native Windows version. Windows users need to make a bootable USB drive with a Linux environment — the community tool for this is called palen1x. You boot your PC from the USB stick, run palera1n from there, and then boot back into Windows when you are done. Your Windows installation is untouched, but you do need a spare USB drive and a little patience.

Whichever computer you use, use a reliable, genuine or Apple-certified USB cable. Cheap cables are the leading cause of disconnections during DFU mode, and a disconnection halfway through the jailbreak is what turns a smooth process into a recovery problem.

What You Need: A Quick Checklist

  • An iPhone 8 or iPhone X on iOS 15.0 to iOS 16.7 (check in Settings, then General, then About)
  • A full backup, made on your computer
  • A Mac or Linux computer, or a Windows PC with a palen1x bootable USB drive
  • A reliable USB cable — Lightning to USB, preferably Apple-certified
  • The official palera1n release, downloaded only from the project’s official GitHub repository. Do not download it from any other site or video description.
  • Fifteen to thirty minutes without interruptions, and your phone charged to at least 50 percent

Note the version limit. palera1n supports iOS 15.0 through iOS 16. On iOS 14 or earlier, use checkra1n instead — see our guide to checkra1n. On iOS 17 or later, there is no jailbreak for these phones at all, and updating would remove the option permanently: the iPhone 8 and X cannot run iOS 17, so if yours is on iOS 16.7, that is where it stays, and that is exactly where palera1n works.

The Steps: Jailbreaking with palera1n

This is a guide-level outline, not a copy of the project’s commands. palera1n is updated regularly, and its exact commands can change between versions, so always follow the instructions in the official release you downloaded. The sequence is always the same:

Step 1: Get the official palera1n release

Go to palera1n’s official GitHub repository and download the latest release for your computer — macOS or Linux. Check the release notes for your iOS version and your chip, and read the README before you run anything. If a site other than GitHub offers you a “palera1n” download, a one-click installer, or a paid version, it is not the real tool. The real palera1n is free and it is only distributed by the project itself.

Step 2: Connect your iPhone and run palera1n

Connect your iPhone to your computer with the USB cable and trust the computer if your phone asks. Open a terminal, and run palera1n with the options you want. For most people, those options are the rootless mode and installing Sileo. The tool will check your device, confirm the chip and iOS version, and tell you if anything is wrong before it changes your phone. If it warns you about a passcode, a version mismatch, or an unsupported device, stop and fix the problem it names — do not force it.

Step 3: Enter DFU mode

palera1n will ask you to put your iPhone into DFU (Device Firmware Update) mode. DFU is a low-level state that lets the tool talk to the bootrom, and it is the step that uses checkm8. On iPhone 8 and iPhone X, the sequence is: press Volume Up, press Volume Down, then press and hold the Side button until the screen goes black, then hold the Side button and Volume Down together for a few seconds, then release the Side button and keep holding Volume Down until the tool detects the phone. The screen stays black the whole time. If your phone shows the Apple logo, you are in recovery mode, not DFU mode, and you need to try again. palera1n will tell you when it has detected the phone in DFU mode.

Step 4: Let palera1n install, then open Sileo

Once DFU mode is detected, palera1n runs the exploit and installs the jailbreak. Your phone will restart, and after it comes back up you should see the palera1n loader app on your home screen. Open it, tap to install Sileo, and wait for the installation to finish. When Sileo appears on your home screen, your iPhone is jailbroken. The first thing Sileo does is refresh its sources and prepare the system; let that finish before you install your first tweak. You can also use the Jailbreak Compatibility Checker afterwards to double-check what you have, in case you ever forget which tool and version you used.

After the Jailbreak: First Steps and Safe Habits

A jailbreak is only as safe as the tweaks you install. Get the basics right and your phone will stay stable.

  • Re-jailbreak after every reboot. Because palera1n is semi-tethered, a restart puts the phone back into its normal, un-jailbroken state. You need your computer and palera1n again to restore the jailbreak. Keep your computer and cable handy, and remember that this is normal — it is not a sign of a problem.
  • Install one tweak at a time. If something goes wrong after installing a package, you want to know which one caused it. Installing five tweaks at once turns troubleshooting into guesswork.
  • Only use trusted sources. Sileo comes with reputable default repositories. Do not add pirate repositories, and do not install tweaks from unknown sources. Piracy is not what jailbreaking is about, and pirated tweaks are the most common source of malware, crashes, and corrupted systems.
  • Check tweak compatibility. Only install tweaks that say they support your iOS version and the rootless mode. A tweak built for iOS 14 rootful mode may not work — or may break things — on iOS 16 rootless. Check the tweak’s page before you tap install.
  • Do not update iOS while jailbroken. Installing a software update from Settings on a jailbroken phone can cause a boot loop. If you need to update, remove the jailbreak first (see the last section), update normally, and accept that the jailbreak will be gone.

Troubleshooting

Stuck in DFU mode

If your phone is in DFU mode and the process stalls, or the tool stops detecting the phone, disconnect the cable, then press and hold the Side button and Volume Down together for about ten seconds to force the phone to restart. If the phone still does not respond, try a different USB port — preferably a port directly on the computer, not through a hub — and a different cable. If it keeps failing, make sure you are using the latest official palera1n release for your iOS version, and check the project’s troubleshooting notes before trying again.

Sileo is missing after the jailbreak

If the jailbreak finished but Sileo is not on your home screen, open the palera1n loader app and reinstall Sileo from there. Make sure the jailbreak is running: if the loader says the phone is not in the jailbroken state, re-run palera1n with the phone in DFU mode again. If Sileo opens but shows errors, let it refresh its sources, and do not interrupt it while it works.

The jailbreak fails with a passcode error

If palera1n refuses to proceed and mentions a passcode, you have probably chosen a rootful or fakeFS option on iOS 16. Switch to rootless mode and try again. If you are set on the rootful path, you will need to restore your iPhone and not set a passcode this time — which is why this guide recommends rootless in the first place.

How to Remove palera1n

Removing palera1n is easy, and you can always jailbreak again later if you change your mind. The simplest way is to restore your iPhone with your computer, which wipes the jailbreak and returns the phone to stock iOS. You can also use the restore option in the palera1n loader app, which removes the jailbreak files without wiping your data, although a full restore is the cleanest option if you are selling the phone or taking it for repair. After removal, your phone is a normal iPhone again: Face ID works, all stock features work, and the phone can be updated normally. If the iPhone will go through security screening at a border or workplace, remove the jailbreak first — a jailbroken phone is harder to explain than a stock one.

Frequently Asked Questions

Is palera1n safe?

palera1n is a well-known, open-source tool used by thousands of people, and it is safe when you download it from its official GitHub and follow its instructions. The risk comes from the tweaks you install and from fake downloads, not from palera1n itself. Back up first, use rootless mode, and only install trusted tweaks.

Can I jailbreak iPhone 8 or X with palera1n on iOS 17?

No — the iPhone 8 and X cannot run iOS 17 at all. Their last iOS version is iOS 16.7, which is exactly the version palera1n supports. For a full overview of every model, see our iPhone Jailbreak Compatibility Chart.

Do I need a computer?

Yes. palera1n needs a computer — Mac or Linux natively, or a Windows PC booting the palen1x Linux USB stick. There is no way to jailbreak with palera1n from the phone alone, and any site that says otherwise is a scam.

Will jailbreaking void my warranty?

Your iPhone 8 or X is long out of warranty, but the general rule still applies: jailbreaking can be a reason for Apple to refuse service, and it violates Apple’s software terms. Restoring the phone removes the jailbreak and every trace of it before you hand the phone to anyone.

Scroll to Top